Model 2700

High R-Value Foamed-In-Place Sectional Door Steel Interior and Exterior Skins. Polyurethane Insulation. 10-Year Limited Warranty

It is constructed using foamed-in-place polyurethane insulation which creates a strong monolithic panel that is energy efficient.

Each Model 2700 is secured with standard 14-gauge, galvanized steel hinges. The interior skin of each section has two continuous horizontal 20-gauge reinforcing strips. The section joint is thermally broken and chemically bonded with a pressure-sensitive adhesive sealant. An EPDM rubber weather seal further enhances the performance of the joint.

• Track: All Amarr Doors are available with both 2" or 3" track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit our downloads website.
• Hardware: Amarr hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.
• Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

Model 1350

High R-Value Foamed-In-Place Sectional Door Steel Interior and Exterior Skins. Polyurethane Insulation. 10-Year Limited Warranty

This energy efficient model is designed to provide maximum value for your budget. The sections are insulated with foamed-in-place polyurethane which creates a strong monolithic panel.

Each Model 1350 is secured with standard 14-gauge, galvanized steel hinges. The interior skin of each section has two continuous horizontal 20-gauge reinforcing strips. The section joint is thermally broken and chemically bonded with a pressure-sensitive adhesive sealant. An EPDM rubber weather seal further enhances the performance of the joint.

• Track: All Amarr Doors are available with both 2" or 3" track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit our downloads website.
• Hardware: Amarr hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.
• Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

Modle 1000

Heavy Duty Insulated Steel Door Steel Exterior and Interior Skins 2" CFC-free Polystyrene Insulation 10-Year Limited Warranty

Two tough steel skins surround 2 inches of CFC-free polystyrene insulation. In addition, a thermal break creates a barrier to keep heat and cold from transferring through the door. Each Model 1000 features heavy-duty hardware for smooth operation.

To help resist dents, the outer steel skin is made of strong 24-gauge steel and the interior skin is made of 27-gauge steel. The interior and exterior faces of the door feature stucco embossing and the exterior has shallow ribs. The Model 1000 is available prepainted in Commercial White.

• Track: All Amarr Doors are available with both 2" or 3" track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit our downloads website.
• Hardware: Amarr hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.
• Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

Model 1380

Medium Duty Insulated Steel Door Steel Exterior and Interior Skins 1 3/8" CFC-free Polystyrene Insulation 10-Year Limited Warranty

Each skin is made of 27-gauge steel to provide a solid wall of protection from the elements. Our 4-step insulation system features insulation, weather-stripping, thermal break, and tongue and groove construction for a snug fit between sections.

The exterior face is stucco embossed and ribbed with shallow grooves. The interior surface is stucco embossed. Model 1380 is available prepainted in Commercial White.

• Track: All Amarr Doors are available with both 2" or 3" track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit our downloads website.
• Hardware: Amarr hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.
• Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

Model 2000/2400/2500

Extra Heavy/Heavy/Medium Duty Commercial Door 20, 24, or 25 Gauge Steel Exterior Skin Insulation and Steel Interior Options Smooth Texture - Models 2000 & 2400 Wood Grain Texture - Model 2500 5-Year Limited Warranty.

These open-back commercial steel doors are available in a variety of steel gauges and feature tongue and groove construction with a bottom weatherseal to guard against the elements. These doors can be factory- or field-modified with CFC-free polystyrene insulation to fit the needed application.

• Track: All Amarr Doors are available with both 2" or 3" track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit our downloads website.
• Hardware: Amarr hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.
• Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

Model 3500/3550

Aluminum Full View Door Full View Glass Panels Optional Solid Aluminum Panels Anodized Aluminum Finish 1-Year Limited Warranty

Amarr’s aluminum door is constructed of 2" thick extruded aluminum rails and stiles and can be fitted with solid aluminum panels or full-view glass. Perfect for service stations or fire stations - our aluminum door creates a clean look for any facility.

• Track: All Amarr Doors are available with both 2" or 3" track in Standard Lift, High Lift, Vertical Lift, Low Headroom, and Follow the Roof Pitch. Custom track configurations are also available. For drawings and more information, please visit our downloads website.
• Hardware: Amarr hardware includes minimum 14-gauge galvanized steel hinges and 13-gauge galvanized steel track brackets. All rollers have minimum 10-ball bearings.
• Springs: Torsion springs are oil tempered, helical wound and custom computed for each door for a minimum 10,000 cycle life. Optional springs are available up to 100,000 cycle life.

4000 Series

Rolling Service Doors Available in 22, 20, or 18 Gauge Slats 50,000 Cycle Springs Heavy Duty Cast Iron Gears 2-Year Limited Warranty

The standard of the industry, the 4000 Series provides excellent security and years of worry free operation. It is available in three steel gauges (18, 20, and 22), depending on the width of the door. The door is available in a durable standard gray finish, which resists abrasions and eliminates the need to paint.

• Oil tempered torsion springs designed for 50,000 life cycles.
• Cast iron stops.
• 1/4" thick (minimum) steel plate brackets.
• Heavy duty cast iron gears.
• Structural angle guides and bottom bar.
• Chain keeper.
• Optional cylinder locks.

4100 Series

Insulated Rolling Service Doors Available in 22, 20, or 18 Gauge Slats 22 Gauge Interior Slat 50,000 Cycle Springs Guide Weatherseal 2-Year Limited Warranty

In applications where climate control is a must, the 4100 Series provides the protection you need. Maximum energy efficiency is obtained by placing solid insulation between the exterior and interior galvanized steel skins.

• Heavy-duty vinyl extrusions snap into the guides to reduce air and dust infiltration and to weatherstrip the door jambs.
• A water-resistant hood baffle remains flexible in cold weather and helps reduce air infiltration around the hood.
• Insulated, interlocking slats provide energy efficiency and a clean appearance inside and out.
• Solid insulation is inserted between galvanized steel slats to ensure consistent density and complete insulating coverage.
• The bottom of the door is sealed by a flexible, solid foam astragal.
• Heavy duty cast iron gears.
• Optional cylinder locks.
• Cast iron stops.
• Structural angle guides (shown in photo) and bottom bar.

4200 Series

Rolling Service Fire Doors Governor Control with Lifetime Warranty Fusible Link 50,000 Cycle Springs Guide Weatherseal 2-Year Limited warranty

For reliable protection every time, the 4200 Series fire door provides peace of mind with its unmatched operation. The 4200 Series is guaranteed to close quickly to keep employees, products, and property safe.

• Governor control, that assures a closing speed from 6" to 24" per second, has a lifetime warranty.
• Fusible link.
• Oil tempered torsion springs designed for 50,000 life cycles.
• Heavy duty cast iron gears.
• Door can be easily tested and reset from one side of the door.
• Structural angle guides (shown in photo) and bottom bar.
• Approved for all wall types (concrete, masonry, steel, steel with gypsum board).
• Available in up to a 4 hour rating.
• Release mechanism parts designed to provide years of testing without maintenance or repairs.
• Door can be tested in fully closed position without damaging the mechanisms.
• Pyroglass non-asbestos bulb astragal.
• Optional cylinder locks.
• Optional electromagnetic release device.

4300 Series

Rolling Grilles Solid Aluminum Rods Extruded Aluminum Guides and Bottom Bar Cylinder Lock 50,000 Cycle Springs 2-Year Limited Warranty

For a clean look that provides maximum visibility and outstanding security, the 4300 Series rolling grilles have the strength to assure property protection. By using 5/16" solid aluminum rods instead of hollow rods, these models are built to stand up to extensive use and deter potential intruders.

• Oil tempered torsion springs designed for 50,000 life cycles.
• Solid aluminum rods – 5/16" or 3/16".
• Durable links (standard 1/8" thick, or heavy duty 3/16" thick).
• Cylinder locks concealed in the bottom bar.
• Choice of two grille patterns: Standard up to 30' wide, Heavy duty for all sizes
• Heavy duty extruded aluminum guides and bottom bar.

4400 Series

Rolling Counter Doors 10" Steel Brackets Box Shaped Guides Tubular Bottom Bar 20,000 Cycle springs 2-Year Limited Warranty

Designed specifically for the counter, these doors come standard with 10" brackets, 20,000 cycle oil tempered torsion springs, box shaped guides for a clean and professional appearance, and a tubular bottom bar that conceals the locking mechanism. These doors are available in steel, stainless steel, and anodized aluminum. Optional sills and trim are available on all models.

• Torsion springs designed for 20,000 cycles standard.
• 10" brackets made with 1/8" (min) steel standard on all sized doors.
• Interlocking aluminum slats.
• Box shaped guides for a clean and professional appearance.
• Tubular bottom bar conceals the locking mechanism.
• Heavy duty cast iron gears.
• Standard Grey Finish (White and Tan available)
• Stainless Steel and Anodized Aluminum are available options.
• Optional Powder Coat in 180 standard colors.

4500 Series

Rolling Counter Fire Doors Fusible Link Up to a 3 Hour Fire Rating Box Shaped Steel Guides Tubular Bottom Bar 20,000 Cycle springs 2-Year Limited warranty

These doors have all of the protective features of the full sized fire door, but are designed with the professional elegance desired from a counter door. The doors come standard with box shaped guides for a clean and professional appearance. A tubular bottom bar conceals the locking mechanism. These doors are available in steel and stainless steel. Optional sills and trim are available on all models.

• Governor control, that assures a closing speed of 6" to 24" per second, has a lifetime warranty.
• Fusible link.
• Torsion springs designed for 20,000 cycles standard
• 10" brackets made with 1/8" (min) steel standard on all sized doors
• Interlocking slats
• Box shaped steel guides for a clean and professional appearance
• Tubular steel bottom bar conceals the locking mechanism
• Heavy duty cast iron gears
• Door can be easily tested and reset from one side of the door.
• Approved for all wall types (concrete, masonry, steel, steel with gypsum board).
• Available in up to a 3 hour rating.
• Release mechanism parts designed to provide years of testing without maintenance or repairs.
• Door can be tested in fully closed position without damaging the mechanisms.

5700 Series

Medium-duty Service Door

The 5700 series rolling steel service door provides a medium-duty service door at the economical price-point of sheet door. The curtains are constructed of individual 3" slats that provide strength and security that can easily be repaired in high traffic applications.

• Fully enclosed 12" galvanized steel barrel
• 3" replaceable slats made from 24 gauge hot-dipped galvanized steel
• Individual slats can be replaced easily if damaged by equipment traffic ensuring security, safety and long-lasting aesthetic appeal
• Extruded aluminum bottom bar with integral reinforcement includes a two-part posi-lock door stop for additional safety
• Full width PVC bulb-type astragal provides seal for irregular floors
• Roll-formed 14-gauge hot-dipped galvanized guides
• Standard UHMW Nylon end locks reduce friction and noise and provides curtain alignment during operation
• Available in sizes up to 14 feet (4.267 m) wide and 14 feet (4.267 m) high
• Optional electric operators provide maximum opening convenience and effortless operation
• 4:1 Reduction gear chain hoist standard over 100 square feet.
• Optional 20-gauge hex-shaped hood assembly available
• EZ-Install exclusive packaging protects the door until final installation is complete

Model 5501

Self Storage Door

Perfect for most storage facilities, the Model 5501 offers excellent performance and reliability at an economical price. This model features 21 different colors, extruded aluminum bottom bar with structural steel angle, and galvanized steel guides that are hot dipped for maximum strength and rust resistance. The Model 5501 is available in sizes starting as small as 3' wide.

• 26-gauge galvanized steel curtain
• Siliconized Polyester primer and top coat
• Extruded aluminum bottom bar with structural steel angle for maximum strength
• Dual lock assembly provides for two padlocks for added security
• Heavy-duty galvanized steel guides hot dipped for maximum strength and rust resistance
• Exterior polypropylene wear strip to reduce friction and ensure smooth and quiet operation
• 9-1/2" drum assembly
• Steel bearing shaft support
• Adjustable tensioning device

Model 5536

Light-Duty Sheet Door

Our Model 5536 is economical and durable. This model is an excellent choice for most light-duty commercial applications. The 9-1/2" galvanized steel drums allow this door to fit in headroom requirements as low as 15". The Model 5536 is available in 21 colors, has dual galvanized steel slide locks, and galvanized steel guides. When cost is a major consideration, the Model 5536 is designed to be economical without sacrificing performance, craftsmanship, or aesthetics.

• 26-gauge galvanized steel curtain
• Siliconized Polyester primer and top coat
• Extruded aluminum bottom bar with structural steel angle for maximum strength
• Dual galvanized steel slide bolt locks attached to the bottom bar
• Heavy-duty galvanized steel guides hot dipped for maximum strength and rust resistance
• Exterior polypropylene wear strip to reduce friction and ensure smooth and quiet operation
• 9-1/2" drum assembly
• Steel bearing shaft support
• Heavy-duty wall mounting bracket
• Reduced Drive chain hoist standard over 100 sq. ft.

Model 5601

Heavy-Duty Sheet Door

Engineered for high cycle applications, the Model 5601 is a great door for most docks or warehouses. The Model 5601 is available in 21 colors and features dual galvanized steel slide bolt locks, structural steel wall mounting brackets, steel bearing shaft support, 12" drum assembly, and heavy-duty galvanized steel guides.

• 26-gauge galvanized steel curtain
• Siliconized Polyester primer and top coat
• Extruded aluminum bottom bar with structural steel angle for maximum strength
• Dual galvanized steel slide bolt locks attached to the bottom bar
• Heavy-duty galvanized steel guides hot dipped for maximum strength and rust resistance
• Interior and Exterior polypropylene wear strip to reduce friction and ensure smooth and quiet operation
• 12" drum assembly
• Steel bearing shaft support
• Structural steel wall mounting bracket
• 4:1 reduction gear chain hoist standard for doors over 100 sq. ft.

Model 5652

Heavy-Duty Wind Load Certified Sheet Door

Manufactured to withstand wind speeds up to 140 mph, the Model 5652 can help protect property and products in storm prone areas. The Model 5652’s UHMW nylon windlocks provide maximum protection without sacrificing ease of operation. This door is also perfect for oversized commercial applications up to 20' wide. The Model 5652 is available in 21 colors, has dual galvanized steel slide locks, and heavy-duty galvanized steel guides.

• 26-gauge galvanized steel curtain
• Siliconized Polyester primer and top coat
• Extruded aluminum bottom bar with structural steel angle for maximum strength
• Dual galvanized steel slide bolt locks provide for two padlocks and added security
• Heavy-duty galvanized steel guides hot dipped for maximum strength and rust resistance
• UHMW nylon windlocks provide up to 140 mph protection without sacrificing ease of operation
• 12" drum assembly
• Steel bearing shaft support
• Structural steel wall mounting bracket
• 4:1 reduction gear chain hoist standard for doors over 100 sq. ft.