Thermospan® 200-20

Wayne-Dalton's Thermospan® 200-20 offers premium thermal efficiency combined with a heavy-duty, 20-gauge flush exterior surface. Featuring continuous foamed-in-place insulation and a non-conductive thermal break between the inner and outer skins, the Thermospan 200-20 provides a U-value of .057 and an R-value of 17.50, making it the ideal door for energy-conscious architects, engineers, contractors, and building owners.

The Wayne-Dalton Thermospan Series doors are the only ones in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available.

The Thermospan 200-20 outperforms other conventional insulated steel doors in the area of energy efficiency. The Thermospan 200-20 offers a U-Value of .057 (R-value of 17.5) – a dramatic improvement over most conventional insulated steel doors, which typically have R-values between 5 and 8. At the heart of the Thermospan 200-20’s excellent insulation qualities is a patented manufacturing process during which the polyurethane core is continuously foamed-in-place between the outer and inner skins, forming a homogenous sandwich of steel/polyurethane/steel. This process creates outstanding thermal, strength, and bonding characteristics which combine to make the Thermospan 200-20 an ideal choice for commercial and industrial applications. Additionally, a non-conductive thermal break virtually stops hot or cold outside temperatures from being transmitted to the inside.

The Thermospan 200-20 also features two patented 1 3/4" integral roll-formed struts per section providing the highest strength-to-weight ratio.

Part of what makes the Thermospan 200-20 virtually maintenance free is the pre-painted flush exterior surface. This outer skin of hot-dipped galvanized, structural quality steel is factory finished with baked-on corrosion-resistant primer and a white polyester finish coat. The inner skin is also hot-dipped galvanized steel factory finished with the same corrosion-resistant primer and polyester finish coat.

The Thermospan 200-20 features an innovative thermal break that keeps the interior skin at room temperature, preventing condensation and frost and thereby resisting corrosion. A flexible vinyl bulb seal and non-corrosive polymer retainer prevent water and air filtration at the bottom of the door. Reinforcement plates are located at all hardware attachment locations, and industry standard commercial-grade, heavy-duty, hot-dipped galvanized hardware also contribute to the Thermospan 200-20’s long service life.

Thermospan® 200

Wayne-Dalton Thermospan® 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value of .057 and an R-value of 17.50.

The secret behind this exceptional energy efficiency is Wayne-Dalton’s patented manufacturing process, during which the polyurethane core is continuously foamed-in-place between the outer and inner steel skins to form a homogenous sandwich of steel/polyurethane/steel. The technique produces outstanding thermal, strength and bonding characteristics. Additionally, a non-conductive thermal break virtually stops hot or cold outside temperatures from being transmitted to the inside.

The Thermospan 200 also features two patented 1 3/4" integral roll-formed struts per section providing the highest strength-to-weight ratio.

Part of what makes the Thermospan 200 virtually maintenance free is the pre-painted exterior surface. This outer skin of hot-dipped galvanized, structural quality steel is factory finished with baked-on corrosion-resistant primer and a white or brown polyester finish coat. The inner skin is also hot-dipped galvanized steel, factory finished with the same corrosion-resistant primer and polyester finish coat.

The Thermospan 200 features an innovative thermal break that keeps the interior skin at room temperature, preventing condensation and frost, thereby resisting corrosion. Flexible vinyl bulb seal and non-corrosive polymer retainer prevent water and air infiltration at the bottom of the door. Reinforcement plates are located at all hardware attachment locations, and industry standard commercial-grade, heavy-duty, hot-dipped galvanized hardware also contribute to the Thermospan 200’s long service life.

Thermospan® 150

Wayne-Dalton’s Thermospan® 150 polyurethane insulated door provides excellent thermal efficiency. Featuring an R-value of 14.16 (U-value of .0706), the Thermospan 150 is an excellent value when energy efficiency is important but strength, rigidity and durability can’t be compromised.

The Wayne-Dalton Thermospan Series doors are the only doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available.

Popular in a wide variety of commercial and industrial applications,the Thermospan 150 offers a strong combination of characteristics, including strength,rigidity,longer life and energy efficiency at a highly competitive price.

The Thermospan 150 is manufactured using our patented, continuous foamed-in-place technology, in which the polyurethane core is securely bonded to hot-dipped galvanized inner and outer skins. This process gives the Thermospan 150 outstanding thermal, strength, and bonding characteristics while creating a door that is significantly more efficient than conventional insulated steel doors. A designed-in joint seal also helps save energy by preventing air filtration. Optional factory glazed windows and aluminum full view panels, combined with two standard finishes (white and brown), help ensure that the Thermospan 150 meets your aesthetic requirements as well.

The Thermospan 150 is designed for easy installation, rugged durability and longer life. Features such as 18-gauge steel end caps and two 13⁄4" roll-formed struts on each section give the Thermospan 150 increased rigidity, while the factory finished interior and exterior hot-dipped, galvanized skins make installation easier, add life to the door and provide greater durability. The Thermospan 150 also features hardware plates at all fastener points to add durability and extend the life of the door.

Thermospan® 125

Wayne-Dalton’s Thermospan® 125 doors feature continuous foamed-in-place polyurethane insulation and standard joint seal that provide an R-value of 10.79. At this price point, the construction provides a substantially higher thermal efficiency than industry standard polystyrene doors.

The Wayne-Dalton Thermospan Series doors are the only doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available.

Ideal for applications where energy efficiency is important, and competitive cost is essential, Wayne-Dalton’s Thermospan 125 sectional door features a foamed-in-place polyurethane core firmly bonded to hot-dipped galvanized inner and outer skins.Integral roll-formed struts per section add rigidity and strength, making the Thermospan 125 suitable for commercial and industrial applications. The patented Thermospan design demonstrates that overhead doors need not be the weak link in an energy-efficient building.

Thermospan 125 doors feature pre-painted inner and outer skins made from hot-dipped galvanized steel for added corrosion protection.The exterior suface is pebbled and grooved, enhancing the appearance while providing improved strength, and each section is reinforced with two 1 3/4" integral roll-formed struts for even greater rigidity. Hot-dipped 18-gauge galvanized end caps offer a superior surface for hinge attachment. Our standard joint seal prevents air infiltration and in conjunction with the solid polyurethane core, offers enhanced energy efficiency.

ThermoMark® 5200

The ThermoMark™ 5150 and 5200 doors combine strength, insulation and aesthetic appeal for those applications that require all three features. Made of hot-dipped galvanized steel, they are designed with a woodgrain finish in either a raised panel or flush profile in a variety of colors. Foamed-in-place polyurethane insulation helps keep energy costs to heat or cool the building a minimum, offering year round comfort while also helping to provide quieter door operation.

Popular in a wide variety of commercial and industrial applications, the ThermoMark 5150/5200 offers a strong combination of characteristics, including strength, rigidity, longer life and energy efficiency at a highly competitive price.

The ThermoMark 5150/5200 is manufactured using our patented, continuous foamed-in-place technology, in which the polyurethane core is securely bonded to hot-dipped galvanized inner and outer skins.This process gives the ThermoMark 5150/5200 outstanding thermal, strength, and bonding characteristics while creating a door that is significantly more efficient than conventional insulated steel doors. A designed-in joint seal also helps save energy by preventing air filtration. Optional factory glazed windows and aluminum full view panels, combined with two standard finishes (white and brown),can help ensure that the ThermoMark 5150/5200 meets your aesthetic requirements as well.

The ThermoMark 5150/5200 is designed for easy installation, rugged durability and longer life. Features such as the 18-gauge steel end caps give the ThermoMark 5150/5200 increased rigidity, while the factory finished interior and exterior hot-dipped,galvanized skins make installation easier, add life to the door and provide greater durability. The ThermoMark 5150/5200 also features hardware plates at all fastener points to add durability and extend the life of the door.

ThermoMark® 5150

The ThermoMark™ 5150 and 5200 doors combine strength, insulation and aesthetic appeal for those applications that require all three features. Made of hot-dipped galvanized steel, they are designed with a woodgrain finish in either a raised panel or flush profile in a variety of colors. Foamed-in-place polyurethane insulation helps keep energy costs to heat or cool the building a minimum, offering year round comfort while also helping to provide quieter door operation.

Popular in a wide variety of commercial and industrial applications, the ThermoMark 5150/5200 offers a strong combination of characteristics, including strength, rigidity, longer life and energy efficiency at a highly competitive price.

The ThermoMark 5150/5200 is manufactured using our patented, continuous foamed-in-place technology, in which the polyurethane core is securely bonded to hot-dipped galvanized inner and outer skins.This process gives the ThermoMark 5150/5200 outstanding thermal, strength, and bonding characteristics while creating a door that is significantly more efficient than conventional insulated steel doors. A designed-in joint seal also helps save energy by preventing air filtration. Optional factory glazed windows and aluminum full view panels, combined with two standard finishes (white and brown),can help ensure that the ThermoMark 5150/5200 meets your aesthetic requirements as well.

The ThermoMark 5150/5200 is designed for easy installation, rugged durability and longer life. Features such as the 18-gauge steel end caps give the ThermoMark 5150/5200 increased rigidity, while the factory finished interior and exterior hot-dipped,galvanized skins make installation easier, add life to the door and provide greater durability. The ThermoMark 5150/5200 also features hardware plates at all fastener points to add durability and extend the life of the door.

Model 216

Designed to meet the needs of the most rugged applications, the Wayne-Dalton 216 steel sectional door features heavy-duty 16-gauge construction built to withstand severe weather, brutal use and exposure to security hazards. A variety of insulation and lite options are available for the Model 216, which is also available in a wide range of sizes.

The Wayne-Dalton Model 216 steel sectional door is engineered to perform, even in the most punishing environments. Whether subjected to severe weather, rough use or security hazards, the Model 216 will stand the test of time.

Industrial-duty 16-gauge hot-dipped galvanized steel sections are reinforced with heavy duty vertical stiles on the interior of the Wayne-Dalton Model 216. Complete with prelocated extruded mounting holes, these 16-gauge “C”-shaped stiles make hinge installation quick and secure.

Bottom sections feature a flexible bulb-shaped vinyl astragal held in place by a continuous roll-formed steel retainer that reinforces the lower portion of the door at the same time.

Additional options include top head seal, joint seals and jamb seals.Optional insulation, consisting of 1 9/16" expanded polystyrene or urethane and covered with .022" minimum embossed pre-painted white steel provides an R-value of up to 7.64 and a U-value as low as 0.13. Lite options include insulated or non-insulated factory-glazed lites or complete aluminum full-view sections for maximum visibility. Operators can also be specified for use with the Model 216.

Model 220

Wayne-Dalton’s 220 steel sectional overhead door provides high impact resistance and industrial strength. Available in a wide variety of standard sizes, the 220 is available with 20-gauge ribbed or flush hot-dipped galvanized steel exterior skin. A range of lite and insulation options are also available. The model 220 is available in sizes up to 480 sq. ft.

The Model 220 door uses "C"-shaped 20-gauge center and 16-gauge end stiles which are formed of galvanized steel with prelocated extruded holes for rapid hinge attachment. Optional 16-gauge center stiles are also available.

Bottom sections feature a flexible bulb-shaped vinyl astragal held in place by a continuous roll-formed steel retainer that reinforces the lower portion of the door at the same time.

Additional options include top head seal, joint seals and jamb seals. Optional insulation, consisting of 1 5/16” expanded polystyrene or urethane and covered with .022” minimum embossed pre-painted white steel provides an R-value of up to 7.64 and a U-value as low as .013. Lite options include insulated or non-insulated factory-glazed lites or complete aluminum full-view sections for maximum visibility. Operators can also be specified for use with the Model 220.

Model 2415

The Wayne-Dalton 2415 steel sectional doors feature heavy-duty 16-gauge vertical interior end stiles and 20-gauge center stiles for increased strength. The C-shaped stiles, secured with No. 8 screws and adhesive, have prelocated, extruded holes for quick, secure mounting of hinges. The 2415 offers a ribbed exterior skin that also helps to increase strength while enhancing the buildings visual appearance. End stiles wrap around the exterior of each section to protect the section face from wear caused by the door jambs.

The Model 2415 utilizes true 24-gauge ribbed steel sections with 16-gauge vertical end stiles and 20-gauge center stiles attached to the interior. The exterior ribbing consists of two deep and two shallow ribs in each section. The bottom section features a vinyl bulb-shaped astragal, held by a roll-formed, hot-dipped galvanized steel retainer.

Additional options include top head seal, joint seals and jamb seals. Optional insulation, consisting of 1 9/16" expanded polystyrene or urethane and covered with .015" minimum embossed pre-painted white steel provides an R-value of up to 7.64 and a U-value as low as 0.13. Lite options include insulated or non-insulated factory-installed vision lites or complete aluminum full-view sections for maximum visibility. Operators can also be specified for use with the Wayne-Dalton 2415.

Model 2411

The Wayne-Dalton 2411 Steel Sectional Door is designed to provide commercial strength at a very competitive price. The embossed exterior skin features a stucco finish to enhance the buildings appearance, while C-shaped vertical stiles on the doors interior provide added strength and allow quick, secure hinge attachment. End stiles wrap around the exterior of each section to protect the section face from wear caused by the door jambs.

Wayne-Dalton's 2411 features nominal 24-gauge ribbed steel sections with vertical stiles attached to the interior. These 20-gauge stiles are securely attached with No. 8 screws and adhesive and have prelocated, extruded holes for hinge attachment. The exterior ribbing consists of two deep and four shallow ribs in each section, making it ideal for moderate use. The bottom section features a vinyl bulb-shaped astragal, held by a roll-formed, hot-dipped galvanized steel retainer.

Additional options include top head seal, joint seals and jamb seals. Optional insulation, consisting of 1 9/16" expanded polystyrene and covered with .015" minimum embossed pre-painted white steel provides an R-value of up to 7.64 and a U-value as low as 0.13. Lite options include insulated or non-insulated factory-installed vision lites or aluminum full-view sections for maximum visibility.

Model C-20

Wayne-Dalton’s C-20 steel sectional overhead doors are available in a wide variety of sizes and configurations. The design provides high strength at an excellent value. Featuring 20-gauge ribbed steel sections and 20-gauge center and end stiles, the C-20 is available with a number of lite and insulation options.

Every component and feature on the Wayne-Dalton C-20 Steel Sectional Door are designed, engineered, and constructed to enhance the building's architectural beauty.It assures smooth, efficient operation, long and trouble-free operation, and saves installation time and effort. Unique 2” x 3” box-stile design, plus tongue-and-groove construction, adds vertical stability and strength. Stiles are continuously-bonded to the skin surface with high-strength adhesive, resulting in the strongest possible unit. The surface is ribbed for even more strength.Independent tests show that models C-20 sectional doors are significantly stronger compared to leading competitors.

Wayne-Dalton's C-20 steel sectional doors feature pre-finished 20-gauge hot-dipped galvanized sections roll-formed to a full 2" thickness for ultimate strength and durability. 3" wide, and fully-fitted boxed stiles are adhered with adhesive, preventing rust and leakage associated with rivets. Standard bottom door seal along with optional seals on the perimeter and between sections greatly reduce air leakage, adding to the thermal efficiency of the building.

Additional options include insulation and weather stripping that provide a U-value of 0.13 and an R-value of 7.60; factory installed vision lites or full view sections; electric operator; and special engineering to meet windload requirements.

Model C-24

Wayne-Dalton’s C-24 steel sectional overhead doors are available in a wide variety of sizes and configurations. The design provides high strength at an excellent value. Featuring 24-gauge ribbed steel sections and 20-gauge center and end stiles, the C-24 is available with a number of lite and insulation options.

Every component and feature on the Wayne-Dalton C-24 doors are designed, engineered, and constructed to enhance the building's architectural beauty. This assures smooth, efficient operation, long and trouble-free operation, and saves installation time and effort. Unique 2” x 3” box-stile design, plus tongue-and-groove construction, adds vertical stability and strength. Stiles are continuously-bonded to the skin surface with high-strength adhesive, resulting in the strongest possible unit. The surface is ribbed for even more strength. Independent tests show that model C-24 sectional doors are significantly stronger compared to leading competitors.

Wayne-Dalton's C-24 steel sectional doors feature pre-finished 24-gauge hot-dipped galvanized sections roll-formed to a full 2" thickness for ultimate strength and durability. 3" wide, and fully-fitted boxed stiles are adhered with adhesive, preventing rust and leakage associated with rivets. Standard bottom door seal along with optional seals on the perimeter and between sections greatly reduce air leakage, adding to the thermal efficiency of the building.

Additional options include insulation and weather stripping that provide a U-value of 0.13 and an R-value of 7.60; factory installed vision lites or full view sections; electric operator; and special engineering to meet windload requirements.

Model C-2400

The Wayne-Dalton C-2400 steel sectional door, available in a variety of sizes, is an excellent value. Featuring nominal 24-gauge ribbed steel sections, the C-2400 is available with a number of lite and insulation options.

The Wayne-Dalton C-2400 door is designed and built to ensure an economical, trouble-free long life for moderate commercial use. Available with an embossed finish in white or brown or a white smooth finish, the exterior of the C-2400 features a ribbed surface for increased strength and added visual appeal. Unique box-stile design with full 2" thickness and 3" width, plus tongue-and-groove construction, add vertical stability and strength. The stiles are continuously bonded to the skin surface with high strength adhesive, resulting in the strongest possible unit.

Wayne-Dalton's C-2400 steel sectional doors feature pre-finished interior and exterior skins on nominal 24-gauge hot-dipped galvanized steel sections roll-formed to a full 2" thickness for ultimate strength and durability. 3" wide fully-fitted boxed stiles are adhered with adhesive, preventing rust and leakage associated with rivets. Standard bottom door seal along with optional seals on the perimeter and between sections greatly reduce air leakage, adding to the thermal efficiency of the building.

Additional options include insulation and weather stripping that provide a U-value of 0.13 and an R-value of 7.60; factory installed vision lites or aluminum full view sections; electric operator; and special engineering to meet windload requirements.

Full View 451

Wayne-Dalton’s Aluminum Full-View doors are the preferred choice when visibility and light transmission are just as important as aesthetics. Aluminum Full View sectional doors are weather-resistant and virtually maintenance-free, and are ideal for commercial applications such as service stations, car washes, and auto dealerships.

Perfectly suited for applications where maximum light and visibility are desired, Wayne-Dalton’s Aluminum Full-View doors help create a pleasant interior environment while offering a warm and open look from the exterior. Aluminum Full-View doors feature an aluminum bottom section with three to seven clear upper sections, depending upon size.

Glazed with 1/8" DSB glass held in place with aluminum molding and sealed with butyl glazing tape, the Aluminum Full-View 451 is ideal for applications up to 16'2" x16'1". Acrylic (plexiglass) or polycarbonate (lexan) panels, in thicknesses of 1/8" and 1/4" can be substituted for DSB glass.

Aluminum Full-View doors are manufactured using high-quality materials for excellent durability. All stiles and rails are extruded aluminum alloy 6063-T6 and feature a beveled edge around panels. Stiles and rails can be clear anodized (standard) or finished with white or brown powder coat finish. Tracks and hardware are manufactured from hot-dipped galvanized steel, and the doors feature vinyl seals between sections and on the bottom of the door.

Full View 452

Wayne-Dalton’s Aluminum Full-View doors are the preferred choice when visibility and light transmission are just as important as aesthetics. Aluminum Full View sectional doors are weather-resistant and virtually maintenance-free, and are ideal for commercial applications such as service stations, car washes, and auto dealerships.

Perfectly suited for applications where maximum light and visibility are desired, Wayne-Dalton’s Aluminum Full-View doors help create a pleasant interior environment while offering a warm and open look from the exterior. Aluminum Full-View doors feature an aluminum bottom section with three to seven clear upper sections, depending upon size.

Ideal for larger installations and applications where insulation and durability are important, the Aluminum Full-View 452 features 1/2" insulated SSB glass, held in place with aluminum molding and sealed with butyl glazing tape. Alternative glazing options include 1/4" thick plate and wire polished glass.

Aluminum Full-View doors are manufactured using high-quality materials for excellent durability. All stiles and rails are extruded aluminum alloy 6063-T6 and feature a beveled edge around panels. Stiles and rails can be clear anodized (standard) or finished with white or brown powder coat finish. Tracks and hardware are manufactured from hot-dipped galvanized steel, and the doors feature vinyl seals between sections and on the bottom of the door.

Model 900 Service Door

The Wayne-Dalton 900 Series rolling service door is ideal for jobs where an economical solution for durability and strength is needed. The 900 Series offers flexibility in substrate materials with choices of 24, 22, or 20–gauge galvanized steel, stainless steel, or aluminum.

Color options range from our five standard factory-finish colors to a full range of 180 RAL powder coat choices.

Popular in both interior and exterior applications, the Wayne-Dalton 900 Series rolling service door features a galvanized, pre-painted curtain of minimum 24-gauge steel. All 900 series doors are standard wind load rated with a minimum of 20 PSF.

Wayne-Dalton’s 900 Series rolling doors are composed of curved or flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 900 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper countebalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbal ance mechanism. Slat hoods are available in blue, brown, beige, and white doors.

Model 926 Service Door

The Model 926 rolling steel service door provides an economical yet durable solution for self-storage to industrial openings. Yet it does not sacrifice on essential features and benefits needed in such applications.

Wayne-Dalton’s 926 Series rolling doors are composed of flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 926 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation. Zinc plated, cast iron windlocks add strength and prevent lateral slat movement.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper countebalance. Oil-tempered, torsion-type counterbalance springs are wound from ASTM A229 steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbalance mechanism. Slat hoods are available.

Model 800 Service Door

The Wayne-Dalton 800 Series rolling service door is designed to meet the tough requirements of virtually any commercial or industrial application. The 800 Series offers flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum.

Color options range from our standard five factory finish colors to a full range of 180 RAL powder coat choices.

Popular in both interior and exterior applications, the Wayne-Dalton 800 Series rolling service door features a galvanized, pre-painted curtain of minimum 22-gauge steel. The 800 Series doors have a standard windload rating of 20 PSF. An optional windload rating of up to 55 PSF is available to cover your Florida and Dade County windload requirements.

Wayne-Dalton’s 800 Series rolling doors are composed of curved or flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 800 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

Counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper countebalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsion load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood covers the curtain coil and counterbalance mechanism. Slat hoods are available on blue, brown, beige, and white doors.

Model 800C Service Door (insulated)

The Wayne-Dalton 800C Series rolling service door is designed to meet the tough requirements of virtually any commercial or industrial application with the added advantage of energy efficiency. The 800C Series offers flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum.

Color options range from our standard five factory finish colors to a full range of 180 RAL powder coat choices. Polyurethane insulation in each slat promotes energy savings and building comfort.

Popular in both interior and exterior applications, the Wayne-Dalton 800C Series insulated rolling service door features a galvanized, pre-painted curtain of minimum 22-gauge steel. 800C Series doors are wind load rated at 20 PSF. An optional wind load rating of up to 55 PSF is available to cover your Florida and Dade County windload requirements.

Wayne-Dalton’s 800C Series rolling doors are composed of flat slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 800C Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

Counterbalance assembly consists of a spring barrel which serves as load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsion load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbalance mechanism. Slat hoods are available on blue, brown, beige, and white doors.

Titan Steel Service Doors

The Titan Rolling Steel Service Door is simply the largest, strongest, most rugged rolling steel service door in the industry and perfect for the largest of openings.

Constructed from 6 tall curved slats which are formed from 18- gauge or 14- gauge commercial quality steel, it can stand up to severe abuse and provide the highest degree of security for critical requirements. It provides the most windload resistance for any specification, and is available with heavy duty articulating windlocks to permit door operation during high wind speed events.

FireStar 700 Rolling Steel Fire Door

Wayne-Dalton FireStar™ Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection. FireStar doors can be drop-tested and reset at any time by anyone, such as a facility manager or maintenance supervisor, thanks to a standard auto-reset feature.

The FireStar door features a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.

FireStar rolling steel fire doors are a simple and innovative solution for your safety and fire protection needs. Critical elements necessary in the reliable function of fire doors are incorporated as standard features with FireStar’s revolutionary design.

The FireStar door can be drop tested easily and reset in a matter of seconds at any time; no tools or service technicians are required. Please note that this can be done in addition to the door’s required annual inspection by a trained door systems technician. By self-testing throughout the year, facility personnel can be even more confident that their door will function safely in the event of fire.

The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation.

FireStar’s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance.

Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and tested on a regular basis without concerns of premature failure.

FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

Wayne-Dalton incorporates one standardized component design for all FireStar doors regardless of size, and utilizes fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future. And as an added benefit, eliminating one of the fusible link cables helps the door and surrounding area look cleaner and less cluttered. It also reduces the risk of cable interference with other nearby fixtures.

FireStar 700C Insulated Rolling Steel Fire Door

The Wayne-Dalton FireStar Insulated Rolling Steel Fire Door is the innovative solution to safety and fire protection while maintaining thermal integrity.

The 700C Series FireStar door features fire-resistant insulation, making it the ideal choice for exterior openings that require fire doors. Of course, the 700C offers all the features that make the FireStar the most innovative fire door in the industry, including the ability to drop-test and automatically reset the door by anyone without a service call.

FireStar doors also feature forward-thinking designs that outperform other fire doors with reliable, long-lasting performance with smooth, quiet operation.

The FireStar door can be drop tested easily and reset in seconds; no tools or service technicians required. These tests can be done in addition to the required annual inspection by a trained technician. By self-testing throughout the year, you can be even more confident that the door will function safely in the event of fire.

The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation.

FireStar’s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and/or tested on a regular basis.

FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

Wayne-Dalton incorporates one standardized component design for all FireStar doors regardless of size, and utilizes fewer parts than other models.This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future.

As an added benefit, eliminating one of the fusible link cables helps the door and surrounding area look cleaner and less cluttered. It also reduces the risk of cable interference with other nearby fixtures.

Model 600 Rolling Grille

Wayne-Dalton Rolling Grilles offer total security, visibility, and ventilation in a number of patterns and finishes for commercial, industrial, retail, and institutional applications. These grilles are available in steel, aluminum, or stainless steel to meet any need.

Wayne-Dalton Rolling Grilles are designed to maximize security, visibility, and ventilation. The durable construction technique used ensures that the grilles will offer many years of reliable and consistent performance.

Standard features include 5/16” galvanized steel horizontal rods, continuous from jamb to jamb, and covered with aluminum tubes. Vertical links are aluminum. End links ensure that the grille cannot be pulled from guides. The bottom bar is a tubular aluminum extrusion, fitted with nylon end caps which act as bearing surfaces.

Optional cylinder lock assembly in bottom bar activates concealed 3/8” steel tamperproof lock rods. Lock uses standard mortise cylinder, and is also available with an optional removable core. Center locks available up to 25' wide. Aluminum grille patterns are available in clear, mill, or bronze anodized finishes. Optional materials are #304 finished stainless steel and galvanized steel.

Powder coating is available in 180 colors. Powder coating is a dry finishing process in which finely ground particles of pigment and resin are electrostatically charged and sprayed onto the electrically grounded parts of rolling doors.These charged particles adhere to the rolling door parts until they melt and fuse into a solid coating in a curing oven. The result is a finish that radiates beauty and smoothness for an aesthetically pleasing grille.

Operation can be manual push-up, chain, crank, or motor-operated. Door mounting can be self-supporting, using structural tubes, or directly to the building structure.

Counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033" per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

Optional hood cover encloses curtain coil and counterbalance mechanism and is made to match the grille finish.

Model 600 EES Emergency Egress Grille

The Wayne-Dalton emergency egress grille provides secured access to public areas, yet will automatically open fully upon detection of an alarm or power failure. This prevents entrapment in the event of an emergency and allows immediate access to emergency personnel. The emergency egress grille is ideal for schools, hospitals, and office buildings, or other applications that require different levels of access at various times.

Atler Fire Shutter

This section is currently under construction.

Rolling Counter Shutter

This section is currently under construction.

Wood Counter Shutter

This section is currently under construction.

Accordion-Folding Grille

This section is currently under construction.

Integral Frame Counter Shutter

This section is currently under construction.

Secur-Vent® Ventilated Service Door

This section is currently under construction.

DS-357 Roll-Up Door

DS-357 doors have State-wide Florida Product Approval for windload protection up to 52 PSF and have been third party tested for uniform static air pressure.

DS-357 roll-up doors are round profile. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability. Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum windload protection.

Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.

Steel slide-bolt fits onto a molded slide inside of patented corner block. For added security, the slide-bolts also accept padlocks. A sliding curtain lock is available for securing the door from outside.

DS-357 Windload Roll-Up Steel Doors are available in sizes up to 16' X 16', and come in a variety of standard and special colors. You get the doors you need with timely delivery and attractive pricing.

DS-350 Roll-Up Door

DS-350 doors have State-wide Florida Product Approval for windload protection up to 150 mph and have been third party tested for uniform static air pressure.

DS-350 roll-up doors are available in round or square profiles. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability. Heavy-duty 13 gauge guides attach to 8 gauge wall angles to give maximum windload protection. Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.

Steel slide-bolt assemblies at each bottom corner secure the closed door from inside. For added security, the slide-bolts also accept padlocks. A sliding curtain lock is available for securing the door from outside.

DS-350 Windload Roll-Up Steel Doors are available in sizes up to 16' X 16', and come in a variety of standard and special colors. You get the doors you need with timely delivery and attractive pricing. Write, call or fax us for specifying or ordering information.

DS-200 Roll-Up Door

Loading docks, outbuildings and large storage facilities are typical uses for the attractive appearance, sturdy construction, generous dimensions and long service life of DS-200 doors.

DS-200 roll-up doors are available in round or square profiles. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability. Installation to masonry, steel or wood jambs is quick,and simple — no special preparation, no overhead tracks.

Steel slide-bolt assemblies at each bottom corner secure the closed door from inside. For added protection, the slide-bolts also accept padlocks. A sliding curtain lock also is available for securing the door from outside.

DS-200 Commercial Roll-Up Steel Doors are available in a variety of standard and special colors. You get the doors you need with timely delivery and attractive pricing. Write, call or fax us for specifying/ordering information.

DS-100 Light Commercial Roll-Up Door

Mini-storage buildings, loading docks and service buildings benefit from the versatility, sturdy construction, easy operation and long service life of DS-100 doors.

DS-100 roll-up doors are available in round or square profiles. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability. Installation to masonry, steel or wood jambs is quick, and simple — no special preparation, no overhead tracks.

Steel slide-bolt assemblies at each bottom corner secure the closed door from inside. For added security, the slide-bolts also accept padlocks. Available exterior mini curtain lock accepts two shackle locks: one for storage tenant security, the other for building owner risk-protection.

DS-100 Light Commercial Roll-Up Doors are available in sizes to 10' x 10', and a variety of standard and special colors. You get the doors you need with timely delivery and attractive pricing. Write, call or fax us for specifying/ordering information.

DS-75 Mini Storage Roll-Up Door

Both owners and tenants of mini-storage buildings benefit from the sturdy construction, easy operation and long service life built into DS-75 doors.

DS-75 roll-up doors are available in round or square profiles. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability.

Installation to masonry, steel or wood jambs is quick, and simple — no special preparation, no overhead tracks.

Concealed locking slide assembly accepts two shackle locks for equal owner/tenant security. Lockout feature provides owner risk protection.

DS-75 Mini Roll-Up Doors are available in sizes to 10' x 10', and a variety of standard and special colors. You get the doors you need with timely delivery and attractive pricing. Write, call or fax us for specifying and/or ordering information.

DS-50 Counter Shutter

Our attractive counter shutters harmonize with virtually any building decor while protecting property from pilferage and unauthorized entry.

DS-50 Roll-Up Counter Shutters are available in round or square profiles. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability.

Steel slide-bolt assemblies at each inside bottom corner secure the shutter in its fully closed position. Both slide-bolts also accept padlocks. A sliding mini curtain lock also is available for securing the shutter from outside.

DS-50 Roll-Up Counter Shutters are available in sizes up to 6 ft. high and 12 ft. wide in a variety of standard and special colors. You get the counter shutters you need with timely delivery and attractive pricing. Write, call or fax us for specifying/ordering information.

Interior Hallway Systems

The Wayne-Dalton Interior Wall System is a complete, pre-engineered system for climate-controlled, interior storage units. Built for durability, it is ideal for new construction or retrofit applications. Flush Cor-O-Wall™ and corrugated Mod-U-Wall™ panels can incorporate roll-up doors in any configuration.